Uggaustralia-russia.ru

Мода и стиль
0 просмотров
Рейтинг статьи
1 звезда2 звезды3 звезды4 звезды5 звезд
Загрузка...

How to kitchener stitch the toe of your sock

How to kitchener stitch the toe of your sock

How to cast on using double pointed needles

Learn how to knit socks by watching our easy peasy knitting tutorial.

Featured in this video

Kinda Magic Socks 1 Pair

Kinda Magic Socks 1 Pair

Kinda Magic Socks 3 Pairs

Kinda Magic Socks 3 Pairs

Kinda Magic Socks 5 Pairs

Kinda Magic Socks 5 Pairs

Share the Love

How to Kitchener with a darning needle

Thread the darning needle.

Set up: Working from right to left across the stitches, bring the darning needle through the first stitch on the front knitting needle from right to left, as you would put a knitting needle if you were about to purl.

Kitchener stitch step 3

Go through the first stitch on the back knitting needle from left to right, as you would put a knitting needle if you were about to knit.

Pull through in each case.

Kitchener stitch step 4

Knit and off, purl

Put the darning needle through the first stitch on the front needle as though to knit, and slide the stitch off the needle. Put the darning needle through the second stitch on the front needle as though to purl, but do not slide it off.

Purl and off, knit

Put the darning needle through the first stitch on the back needle as though to purl, and slide the stitch off the needle. Put the darning needle through the second stitch on the back needle as though to knit, but do not slide it off.

Kitchener stitch step 6

Repeat to the end and sew in your ends.

Instructions

Kitchener Stitch Step 1: Purlwise on the Front Needle

1. Thread your tail onto a tapestry needle. On the needle in front, pull your tapestry needle through the first stitch as if to purl (from back to front). Don’t pull the stitch off the needle. If you are working with a tail, you can pull the yarn taut; if you’re working with a separate piece of yarn, leave an end long enough to weave in later.

Kitchener Stitch Step 2: Knitwise on the Back Needle

2. On the needle in back, go through the first stitch as if to knit (from front to back). Again, don’t pull the stitch off the needle.

Pro Tip: As you’re working across the stitches, make sure your yarn is under the needles. Sometimes the yarn can get wrapped around the needles and look like a stitch — this avoids the confusion.

Kitchener Stitch Step 3: Pull Stitch 1 Off Knitwise

3. On the front needle, go through the first stitch as if to knit. Pull the stitch off the needle.

Kitchener Stitch: Purlwise on First Needle

4. Still on the front needle, go through the (new) first stitch as if to purl. Don’t pull the stitch off the needle.

Purlwise Through Back Needle

5. On the back needle, go through the first stitch as if to purl. Pull the stitch off the needle.

Читайте так же:
Кофейная такса как сшить

Pro Tip: If you have problems remembering when to drop the stitch, keep this in mind: On the front needle, you only drop the stitch when you insert the needle into it knit-wise. On the back needle, you only drop the stitch when you insert the needle into it purl-wise.

Knitwise on the Back

6. Still on the back needle, go through the (new) first stitch as if to knit. Don’t pull the stitch off the needle.

7. Repeat steps 3-6 until you only have two stitches left.

Finishing Kitchener Stitch

8. When you only have one stitch left on each needle, do Step 1, then jump to Step 3. Now you can begin to adjust the tension of the row. Start on the right side of the row and pull up the right side of the stitch, then the left. It may sound tedious, but it goes quick and makes all the difference!

Pro Tip: Tighten lightly as you’re grafting. You’ll be able to adjust this row of stitches later to match the gauge of the rest of your project.

Kitchener Stitch

Once you get a hang of the technique, you may be able to combine Steps 1-2 into a single movement, and Steps 3-4 into another. It becomes fairly easy to pull the stitch off the needle knit-wise and then go through the next purl-wise (and vice-versa for Steps 3-4).

Pro Tip: Rather than look at the tutorial each time you do this stitch, try a mnemonic device. Chant “knit, purl, purl, knit” or “knit off, purl on, purl off, knit on” as you go. If you need a bit more detail, try this: “pick off as if to knit, prepare as if to purl, pick off as if to purl, prepare as if to knit.” We all do it!

Finishing

The final touch for most knitting projects is blocking.

Soaking your project in warm water with a little soap and then laying it out to dry is all it takes to make your edges and stitches more even and to cover up any inconsistencies in your tension.

Blocking Knitting – How to Block Your Work

Free Video for Subscribers

This video is available to anyone with a free subscription. Sign up for free below.

Already a member? Log in here to watch.

To Do the Blocking Knitting – How to Block Your Work:

  1. Soak for 20 minutes in water with Soak or Eucalan.
  2. Gently squeeze out water.
  3. Lay flat to dry, stretching and pinning if desired.

More Info:

Blocking is more important on some projects than on others. It tends to flatten out the knitted piece, so if your project depends on the stitches being very three-dimensional (ribbed scarves being a prime example), you may want to avoid blocking.

Читайте так же:
Саукеле своими руками из бумаги

Because it flattens out knitted fabric and limits the tendency of Stockinette stitch to curl, blocking is very helpful on any project where you plan to seam or sew the edges. It’s easier to see what’s going on if the edge is flat and straight. To flatten, widen, or straighten the edges of your project even more aggressively, use T-pins to hold the corners and sides of your knitting in place as it dries.

You can pin your piece to anything you want – a couch cushion, the mattress in the spare bedroom, etc. You can also get a blocking kit with specialized interlocking foam pieces that dry quickly and can be arranged in any shape.

To block something lightly, after you soak it, squeeze out as much water as you can before laying it flat. Then, when you lay it flat, be careful not to stretch it out. Just use your fingers to straighten the edges and make the whole thing look even and neat.

To block something aggressively, leave the knitted piece quite damp, stretch it aggressively into the shape that you want, and use T-pins to hold it in that shape until it dries.

BO – Bind Off

In order to wear and enjoy your project, you must take the stitches off the needle.

Use this bind-off (called the Standard Bind-Off) to finish every project unless the directions specify otherwise.

What Is the Knitting Kitchener Stitch?

The Knitting Kitchener stitch is a handy stitch that gives you the ability to stitch together completed pieces invisibly. When you use the Kitchener stitch, you will not have to worry about your project being bumpy or mishappen.

When you use the Kitchener stitch you are creating a fluid seam. This removes harsh seams that can be uncomfortable to wear. Harsh seams can rub against the skin, causing irritation and inflammation.

Kitchener Stitch Free Tutorial

When you put a lot of work into making a project, you do not want to ruin it with a bad seam.

When is the Kitchener Stitch Knitting Used?

The Kitchener stitch may seem complicated at first, but once you learn it, you will use it all the time. The stitch will make your final projects look professional. The stitch can be used for almost any knitting project with live edges, but it is most commonly used for the toes of socks.

The Knitting Kitchener stitch is often used when making:

  • Socks
  • Pillows
  • Stuffed Toys
  • Sweaters
  • Infinity Scarfs
  • Slippers
  • Gloves
  • Hats
  • Headbands
Читайте так же:
Как сшить кита из фетра

How to Graft Using the Kitchener Stitch

  • Supplies Needed
  • Your Project
  • Matching Yarn
  • Tapestry Needle
  • Knitting Needles

Step-by-Step Kitchener Stitch Instructions

What Is Kitchener Stitch In Knitting

Usually, you will be working with live stitches that are still on your knitting needles. There may be times when you will be working with a live edge and a cast on edge. For our tutorial, we will be using 2 live edges.

When pulling the yarn through, you do not want it to be too tight or too loose. Just give it a gentle tug and make it taut. You will want the finished stitches to match the stitches of your project and blend in seamlessly.

Follow the step-by-step instructions below to learn the basics of the Kitchener stitch:

1. Thread your tapestry needle with your coordinating yarn.

2. In your left hand, hold both knitting needles with the live stitches parallel to each other. Point the tips of the knitting needles toward your right hand. The wrong sides of your knitting should be together. And both needles should have the same number of stitches.

3. Insert the threaded tapestry needle into the first stitch on the knitting needle that is closest to you. Insert the needle as if you were going to purl.

4. Pull the needle and yarn through the stitch. Leave a tail that is 2” to 3”. Leave the stitch on the needle.

5. Next, insert the tapestry needle into the first stitch of the back needle as if you were going to knit. Leave the stitch on the needle.

6. Now insert the tapestry needle into stitch one on the first needle as if you were going to knit.

7. Pull the stitch off the needle and pull the yarn through.

8. Next, insert the threaded tapestry needle into the first stitch on the knitting needle that is closest to you. This was the second stitch, but it is not the first since you removed the first stitch. Insert the needle as if you were going to purl.

9. Pull the needle and yarn through the stitch. Leave the stitch on the needle.

10. Now insert the tapestry needle into stitch one on the back needle as if you were going to purl.

11. Pull the stitch off the needle and pull the yarn through.

12. Next, insert the tapestry needle into the first stitch of the back needle as if you were going to knit. This was the second stitch, but it is not the first since you removed the first stitch. Leave the stitch on the needle.

Читайте так же:
Сшить косметичку из джинсов за 30 минут

13. Repeat steps 6-12 until you get to the end of your project. Purl off on the last stitch.

14. Weave in both tails to finish the project.

Tips for Using the Kitchener Stitch on Socks

When you use the Kitchener stitch on socks, you may notice there are ears on the toes. However, with one simple trick, you can eliminate these eyesores.

To stitch the sock without ears, treat the front two stitches on the front needle as one stitch and the last two stitches as one stitch. Do the same for the back needle.

With this tip, you will no longer have unsightly ears on your socks.

Do you Have Difficulty using the Kitchener Stitch in your Knitting Projects?

If you have trouble with the Kitchener stitch, try this one instead.

  • Your socks
  • 2 Large safety pins
  • 3 double-pointed knitting needles

1. Take the 2 large safety pins. Run one pin through the toe stitches on one side and the other pin through the stitches on the other side. Close the pins.

2. Carefully, turn the socks wrong side out. Make sure the pins do not come open.

3. Take 2 of the double pointed knitting needles. Run one through the stitches on one needle. And the other through the stitches on the other pin. Remove the pins.

4. Begin connecting the toes together with the third needle. To do this, insert it into the first stitch on the front needle as if you are going to knit. Then, insert it into the first stitch on the back needle as if you are going to purl.

5. Remove both stitches off to the needle to the right.

6. Repeat steps 4 and 5 until you get to the end of your project.

7. Finish by binding off the last 2 stitches.

To Keep An Eye On

Check your tension as you go. The stitches should blend with the knitted stitches.
If you are working a PURL row, then simply REVERSE your stitches for it to blend with PURL stitches.

Kitchener Stitch Knitting Video Tutorial

How to Kitchener Stitch Socks without Ears

So you’ve mastered the kitchener stitch, but your socks have little ears on the sides of the toes? Here’s how to keep that from happening.

It’s quite simple really, just graft the first two stitches on the front needle as one, and then do the same with the back needle.

Continue as normal until you get to the last two stitches on both the front and back needles and again work those off as one single stitch.

Читайте так же:
Обработка застежки поло на вырезе платья или блузки

There you go, kitchener stitch shaping!

How to BIND OFF with the Kitchener Stitch

Kitchener stitch bind off : Insert your tapestry needle into the stitch on the FRONT needle, pull yarn through and remove stitch from the needle. THEN, insert your tapestry needle into the stitch on the BACK needle, pull yarn through and remove stitch from the needle.

Sewing Machine Parts, Repairs, and Sewing Supplies

We offer a vast selection of parts and accessories for all makes of sewing machines and sergers, and we can service your machine in-store. If you are looking for a sewing notion or part that we don’t have in stock, we can special order it for you.

Whatever sewing supplies you need, you’ll find them here. Our huge stock includes a wide variety of needles, thread, trim, ribbon, scissors, quilting tools, knitting machines, sewing cabinets, and more. We also have the largest selection of buttons and sewing baskets in the area!

Cut a thread end that is at least 2 times as long as the edge, plus 20 cm for the thread ends for sewing. Thread the tail into the tapestry needle.
Hold the pieces with the right side out and the needles parallel to each other. Push the stitches to the right end of the needles.

    Front needle

Insert the tapestry needle from right to left into the first stitch and pull the thread through.

Insert the tapestry needle from left to right into the first stitch and pull the thread through.

Insert the tapestry needle from left to right into the first stitch and let the stitch slip off the needle. Slip from right to left into the next stitch and pull the thread through.

Insert the tapestry needle from right to left into the first stitch and let the stitch slip off the needle. Slip from left to right into the next stitch and pull the thread through.

Repeat steps 3-4 until there is only 1 stitch left on each needle.

Insert the tapestry needle from left to right into the last stitch and pull the thread through.

Insert the tapestry needle from right to left into the last stitch and pull the thread through.

For purl knits, you can also use the same stitch. The easiest way to do this is to hold the knitted pieces together with the wrong side out.

голоса
Рейтинг статьи
Ссылка на основную публикацию
Adblock
detector